Icom IP1000C Instruction Manual page 38

2
SETTING UP THE IP1000C SYSTEM
4. Additional controller link
IP100H makes a Group Call with the Additional Controller Link
Additional Controller Link
192.168.0.2
Office2 (Sub)
IP100H
Sales21
00021
About the Office1 setting (Master)
3. Select "Group" in the [Call Type] item, enter a destination ID and select a group priority. Select controllers
in the [Additional Controller] item. (Refer to an example below.)
[Destination Settings] (menu) > [Destination Settings] (screen) > [Destination Settings] (field)
IP1000C
192.168.0.1
Office1 (Master)
Sales22
Sales group2
00022
00201
The number of transceivers in a site, and any
additional controllers that are set, are displayed.
access point
Sales31 Sales32
Sales group3
00031
00301
Select only Office2 when you do not
make a call from Office3 to Office2 using
the group number "00201."
2-19
Wireless
Sales1 Sales2
Sales group1
00001 00002
00101
192.168.0.3
Office3 (Sub)
00032