Icom IP1000C Instruction Manual page 156

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP110H]
73
74
75
76
77
78
79
80
(This is only an example.)
Stationary Sensitivity ��
79
Motion Sensitivity ����
80
Set the acceleration sensor sensitivity to detect if the user is stationary
or not for the Stationary Detection function.
This setting is used for the Stationary Detection function, and it
determines the acceleration threshold level to activate the Stationary
Detection's ON Timer.
If you set at higher level, the Emergency function is more easily
activated.
Select a level between 1 (high sensitivity) and 10 (low sensitivity).
• Sensitivity example
Set the acceleration sensor sensitivity to detect whether the user is
moving or not, for the Motion Detection function.
This setting is for the Motion Detection function, and it determines the
acceleration threshold level to activate Motion Detection Timer.
If you set a lower level, the Emergency function is more easily
activated.
Select a level between 1 (high sensitivity) and 10 (low sensitivity).
4-103
[Transceiver Settings]–[Transceiver Settings]
10
9
8
7
6
5
4
3
2
1
(Default: 2)
(Default: 7)