Icom IP1000C Instruction Manual page 210

4
ABOUT THE SETTING SCREEN
11. [Management] Menu
■ SNTP Server
The SNTP server is for our RoIP device which have no route to an external Time server (NTP).
L To use this function, an internet connection and default gateway settings are necessary.
1
SNTP Server ������
1
<Apply> ��������
2
<Reset> ��������
3
Select "Enable" to use the SNTP function.
Click to apply the entries.
Click to restore the settings.
L You cannot restore after clicking <Apply>.
4-157
[Management]–[Date and Time]
2 3
(Default: Enable)