Icom IP1000C Instruction Manual page 155

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP110H]
73
74
75
76
77
78
79
80
(This is only an example.)
Motion Detection ����
76
Motion Detection Timer �
77
Reminder Timer �����
78
Set whether or not to use the Motion Detection function.
Set the period of time to activate the Motion Detection function.
Select a time between 1 and 255 seconds.
L When the user continuously moves the transceiver for this set period of time,
Motion Detection's Reminder Timer starts.
L The motion status is detected by Motion Sensitivity.
Reminder beep The Emergency
sounds. function turns ON.
10 sec. 10 sec.
Reminder
ON Timer Timer
Motion is
detected.
Set the period of time to start an emergency call transmission.
An emergency call is transmitted after this set period has passed.
Select a time between 1 and 255 seconds.
L Countdown beeps sound during the timer period.
L When the WLAN transceiver detected a motion during the countdown,
Motion Detection's ON Timer and Reminder Timer are reset.
4-102
[Transceiver Settings]–[Transceiver Settings]
(Default: 10 (seconds))
Emergency
call
Motion
Sensitivity
(Default: 10 (seconds))
(Default: Disable)