Icom IP1000C Instruction Manual page 111

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP100H]
33
34
35
36
37
38
39
40
41
(This is only an example.)
Call Type ��������
38
Emergency: Enable
Cancel on Reply �����
39
Emergency: Enable
Cancel by Time �����
40
Emergency: Enable
Alert Tone��������
41
Emergency: Enable
Select the call type of emergency call from Individual, Group, All, or
Telephone.
L If you select "Individual" or "Group," enter the destination ID (00001 ~ 60000).
If you select "Telephone," enter a Destination Phone Number of up to 31
characters (0–9, #, and *).
Select whether or not to cancel the emergency call when any RX code
is received.
Select whether or not to cancel the emergency call after the set period
of time has passed.
If you select "Enable," enter a time period to between 1 and 255
seconds.
Select whether or not to cancel the emergency call after the set period
of time has passed.
If you select "Enable," enter the Volume (audio level) between 0 and 32,
and select the Action.
4-58
[Transceiver Settings]–[Transceiver Settings]
(Default: 60 (seconds))
(Default: 32, Notification Beep+Vibration)
(Default: All)
(Default: Enable)
(Default: Disable)
(Default: Enable)