Icom IP1000C Quick Start Manual

The automatic firmware update for the WLAN transceivers
The IP1000C has an "Automatic Firmware Update at Power ON" function that allows the WLAN transceiver to
check the firmware version at booting and automatically update if new firmware is available.
• You can enable this function in Transceiver Settings > Transceiver Settings > Maintenance of the IP1000C
setting screen.
• The WLAN transceiver checks for a firmware update while booting. If available, it automatically updates and
then restarts with new firmware.
L All stated specifications and design are subject to change without notice or obligation.
Icom and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United
Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.
All other products or brands are registered trademarks or trademarks of their respective holders.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
May 2022
Below statement is for UKCA purpose only
United Kingdom Authorised Importer: Icom (UK) Ltd.
Address: Blacksole House, Altira Park, Herne Bay, Kent,
CT6 6GZ, U.K.
– 4 –
A7125W-1EX-2 Printed in Japan
© 2014–2022 Icom Inc.
PRECAUTIONS
IP ADVANCED RADIO SYSTEM
CONTROLLER
IP1000C
Important
SAVE THESE INSTRUCTIONS— These instructions
contain basic (important) operating instructions for the
IP1000C.
Explicit Definitions
WORD DEFINITION
Personal injury, fire hazard or electric
R WARNING!
shock may occur.
CAUTION Equipment damage may occur.
If disregarded, inconvenience only. No
NOTE risk of personal injury, fire or electric
shock.
Icom is not responsible for the destruction, damage
to, or performance of any Icom or non-Icom
equipment, if the malfunction is because of:
• Force majeure, including, but not limited to, fires,
earthquakes, storms, floods, lightning, other natural
disasters, disturbances, riots, war, or radioactive
contamination.
• The use of Icom product with any equipment that is
not manufactured or approved by Icom.
Thank you for choosing this Icom product.
READ ALL INSTRUCTIONS carefully and completely
before using this product.
FCC Information
CAUTION: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
About CE
Versions of the IP1000C which display the "CE"
symbol on the serial number label comply with
the essential requirements of the 2014/30/EU
directive for Electromagnetic Compatibility and the 2001/95/
EC directive for General Product Safety.
Disposal
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you
that in the European Union, all electrical and
electronic products, batteries, and
accumulators (rechargeable batteries) must be
taken to designated collection locations at the
end of their working life. Do not dispose of these products
as unsorted municipal waste. Dispose of them according to
the laws in your area.
– 1 –