Icom IP1000C Instruction Manual page 144

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP110H]
41
42
43
44
45
46
47
48
49
50
51
52
53
54
(This is only an example.)
Bluetooth Mic Settings
Auto Disconnect ����
44
Mic Level Offset �����
45
AF Level Offset �����
46
Echo Canceller �����
47
Input Gain �������
48
Voice Delay �������
49
Select whether or not to terminate the SCO (Synchronous Connection-
Oriented) with the Bluetooth headset.
If enabled, the IP110H automatically disconnect the SCO link to the
headset when the set period time in the "Auto Disconnect Time" item
has passed without voice input or output from the headset.
Adjust the microphone level of a Bluetooth device to between 0 and
20 if the sensitivity of the device is extremely higher or lower than the
transceiver or external microphone.
Adjust the audio output level of a Bluetooth device to between 0 and
22 if the output from the device is extremely higher or lower than the
transceiver or external speaker.
Select whether or not to enable the echo canceller function.
The function reduces caused during duplex communication.
Set the signal echo canceller input gain when using a Bluetooth device
to between –40 and 40 (dB).
Adjust the Voice Delay time when using a Bluetooth device to prevent
clipping of the first few syllables after you begin speaking.
The adjustable range is between 0 and 160 milliseconds.
4-91
[Transceiver Settings]–[Transceiver Settings]
(Default: 35 (milliseconds))
(Default: Disable)
(Default: 10)
(Default: 15)
(Default: Enable)
(Default: 0 (dB))