Icom IP1000C Instruction Manual page 112

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP100H]
42
43
44
45
46
47
48
(This is only an example.)
Lone Worker ������
42
Emergency: Enable
Lone Worker ON Timer ��
43
Lone Worker: Enable
Lone Worker Reminder Timer
44
Lone Worker: Enable
PTT Delay Timer �����
45
Lone Worker: Enable
If the Lone Worker function is activated, the Emergency function
is automatically turned ON after the set period has passed with no
operation.
Enter the time period for starting the Lone Worker function within the
range of 1 to 255 minutes (1 minute steps).
• When the IP100H is operated within the time period in this item, the
times for the "Lone Worker ON Timer" (43) and "Lone Worker Reminder
Timer" (44) are reset.
Enter the time period to start the emergency call transmission within the
range of 1 to 255 seconds (1 second steps).
L The emergency call is transmitted after this set period has passed from
when the Emergency function is activated by the Lone Worker function.
L When the Lone Worker Reminder Timer is activated, beeps sound every 2
seconds until the timer is reset.
Enter the time period for the delay time to transmit by pushing [PTT]
while the Lone Worker On Timer and the Lone Worker Reminder Timer
are activated.
Enter the range of 1 to 255 ×100 millisecond (100 millisecond steps).
L If this item is set to a longer period of time, you can reset the Lone Worker
On Timer and Lone Worker Reminder Timer by momentary pushing [PTT]
without transmitting.
L Hold down [PTT] for more than the set time period in this item to transmit.
4-59
[Transceiver Settings]–[Transceiver Settings]
(Default: 60 (seconds))
(Default: 10 (×100 milliseconds))
(Default: Disable)
(Default: 60 (minutes))