Oracle Exadata X10M Service Manual page 46

Targets:
Properties:
ping = (Cannot show property)
ping6 = (Cannot show property)
Commands:
cd
set
show
Use the set ping or ping6 command to send a network test from the
2.
device to a network destination specified in the following table.
Property Set Property Value Description
ping set
ping=<
>
ss
ping set
ping6=<
ress
• From the Oracle ILOM web interface:
Click ILOM Administration → Connectivity → Network.
1.
On the Connectivity page, click the Tools button. The Network Tools dialog
2.
box appears.
set ping=
Type the
IPv4_addre command prompt followed by the IPv4 test
destination IPv4 address. For example:
set ping=192.168.10.106
Ping of 192.168.10.106
succeeded
set ping6=
Type the
IPv6_add command prompt followed by the IPv6 test
>
destination IPv6 address. For example:
set
ping6=2001::db8:5dff:febe:5000
Ping of
2001::db8:5dff:febe:5000
succeeded
Chapter 2
Accessing Oracle ILOM
command at the
->
command at the
->
2-22