Power On An Nvme Storage Drive And Attach A Device Driver; Verify Operation Of An Nvme Storage Drive - Oracle Exadata X10M Service Manual

Close the drive latch to lock the drive in place.
5.

Power On an NVMe Storage Drive and Attach a Device Driver

•
To power on the slot and attach the device driver, type:
# echo 1 > /sys/bus/pci/slots/$slot/power
Where $slot is the slot number for the NVMe storage drive.

Verify Operation of an NVMe Storage Drive

•
To verify that an NVMe drive is operating properly, do one of the following:
•
•
Check the /var/log/messages log file.
Type: ls -l /dev/nvme*
Removing and Replacing Storage Drives Using an OS
Chapter 4
4-8