Oracle Exadata X10M Service Manual page 167

Note:
For information on reconnecting the disk backplane signal cable to the 4-disk
backplane, see
If necessary, reinstall SAS cables in the left-side cable trough.
4.
See Install SAS Storage Drive
Return the server to operation.
5.
Install the fan tray.
a.
See Install the Fan
Install the fan modules.
b.
See Install a Fan
Install the air baffle.
c.
See Install the Air
Install the server top cover.
d.
See Install the Server Top
Return the server to the normal rack position.
e.
See Return the Server to the Normal Rack
Reconnect the power cords to the power supplies, and power on the server.
f.
See Reconnect Power and Data Cables
Verify that the power supply AC OK LED is lit.
g.
Install the 4-Drive Backplane.
Cables.
Tray.
Module.
Baffle.
Cover.
and
Install the Disk Backplane Signal Cable
Position.
Power On the Server.
Chapter 14
14-13