Serial Port Console Redirection; Pci Subsystem Settings - Oracle Exadata X10M Service Manual

AMD CBS Option
SEV-SNP Support
SoC Miscellaneous Control
ABL Console Out Control
ABL Basic Console Out Control
ABL PMU Message Control

Serial Port Console Redirection

Serial Port Console Redirection Option
COM0 Console Redirection Settings
Console Redirection EMS
Console Redirection
Terminal Type
Bits Per Second
Data Bits
Parity
Stop Bits
Flow Control

PCI Subsystem Settings

PCI Subsystem Settings
PCI Driver Version
PCI Settings Common for All Devices
PCI Latency Timer
PCI-X Latency Timer
VGA Palette Snoop
PERR# Generation
SERR# Generation
Above 4G Decoding
Description
With Force APCB Update enabled, enable or disable (default)
support for Secure Encrypted Virtualization and Secure Nested
Paging.
With Force APCB Update enabled, enable or disable the
ConsoleOut Function for ABL. Default is Auto.
With Force APCB Update enabled, enable or disable the Basic
ConsoleOut Function for ABL. Default is Auto.
With Force APCB Update enabled, enable or disable PMU message
for ABL. Default is Auto.
Description
Enable or disable (default) console redirection EMS.
Enable (default) or disable console redirection.
VT100, VT100Plus (default), VT-UFT8, ANSI
9600, 19200, 38400, 57600, 115200 (default)
7, 8 (default)
None (default), Even, Odd, Mark, Space
1 (default), 2
None (default), Hardware, Request to Send or Clear to Send (RTS/
CTS)
Description
Version number of the PCI driver.
Example: A5.01.28
Caution: If you change the PCI settings common to all devices,
there might be unwanted results, such as the system might freeze.
Specify a PCI Bus Clock value (32 (default) 64, 96, 128, 160, 192,
224, 248) to use for the PCI Latency Timer Register.
Specify a PCI Bus Clock value (32, 64 (default), 96, 128, 160, 192,
224, 248) to use for the PCI-X Latency Timer Register.
Enable or disable (default) the PCI cards to snoop on the video card
palettes and register snooping.
Enable or disable (default) the PCI device to generate PERR#.
Enable or disable (default) the PCI device to generate SERR#.
Enable (default) above 4G decoding only if the system supports 64
bit PCI decoding or disable the option.
Appendix F
Advanced Menu
F-7