Monitoring Component Health And Faults Using Oracle Ilom; Getting Help - Oracle Exadata X10M Service Manual

•

Monitoring Component Health and Faults Using Oracle ILOM

Oracle ILOM interfaces provide easy-to-view information about the health status of system
components. From the Oracle ILOM command-line interface (CLI) or web interface, you can
collect system-specific information about the server, determine the health state of discrete
components, and view any open problems on the server. Oracle ILOM automatically detects
system hardware faults and environmental conditions on the server. If a problem occurs on
the server, Oracle ILOM automatically does the following:
• Identify the faulted component in the Open Problems table. Open problems detected on
a host server or system chassis are viewable from either the /System/Open_problems
CLI target or Open Problems web page. To view server open problems, type show /
System/Open_Problems. Refer to View Open Problems Detected on a Managed
Device in the Oracle ILOM User's Guide for System Monitoring and Diagnostics.
• Record system information about the faulted component or condition in the Oracle ILOM
event log. See #unique_76. Refer to Managing ILOM Log Entries in the Oracle ILOM
User's Guide for System Monitoring and Diagnostics.
–
–
–
• Illuminate the Fault-Service Required LED status indicator on the server front and back
panels. See
See
To collect system-level information or to verify the system health status from the CLI, type
show /System. To access subsystem and component health details from the CLI, type
show /System/subsystem-name.
PROCESSORS
MEMORY
POWER
COOLING
STORAGE
NETWORKING
PCI_DEVICES
FIRMWARE
For further information about administering open problems that are detected and reported by
Oracle ILOM, refer to Administering Open Problems in the Oracle ILOM Administrator's
Guide for Configuration and Maintenance Firmware. Refer to

Getting Help

The following sections describe how to get additional help to resolve server-related problems.
Oracle ILOM web interface – Click the Log Out button in the top-right corner of the
screen.
For the event log, type: show /SP/Logs/event/list
For the system log, type: show /System/Log/list
For the audit log, type: show /SP/Logs/audit/list
To scroll through a list, press any key except the q key.
Server Status Indicator
Server Components for status and fault messages.
Monitoring Component Health and Faults Using Oracle ILOM
LEDs.
Oracle ILOM
Chapter 2
Documentation.
2-25