Test The Ipv4 Or Ipv6 Network Configuration - Oracle Exadata X10M Service Manual

•
At the Oracle ILOM password prompt, enter the default password.
5.
Type:
Password: changeme
Oracle ILOM displays the default command prompt (->), indicating that you successfully
logged in to the Oracle ILOM CLI.
Once logged in, change default the root password for security.
6.
For more information on changing account information, refer to
Documentation.

Test the IPv4 or IPv6 Network Configuration

•
Use either the Oracle ILOM CLI or web interface to test the IPv4 or IPv6 network
configuration.
•
Oracle ILOM displays the default command prompt (->), indicating that you
successfully logged in to the Oracle ILOM CLI.
Access Oracle ILOM using an Ethernet connection to the command-line interface:
From a terminal device with network access to the server's NET MGT port, initiate a
Secure Shell session and log into the Oracle ILOM root account. Type:
# ssh root@hostname
Where hostname is either the IP address or host name (when using DNS) of the
server SP.
Note:
By default, Oracle ILOM is configured for DHCP. The DHCP server should
list the IP address for your Oracle ILOM host name or SP MAC address.
Note:
To enable first-time login and access to Oracle ILOM, a default Administrator
account (root) and its password are provided with the system. To build a secure
environment and enforce user authentication and authorization in Oracle ILOM,
you must change the default password (changeme) for the default Administrator
account (root) after your initial login to Oracle ILOM. If this default Administrator
account has since been changed, contact your system administrator for an
Oracle ILOM user account with Administrator privileges.
From the Oracle ILOM CLI:
At the CLI prompt, type the show command to view the network test targets
1.
and properties.
For example, the following output shows the test target properties:
-> show
/SP/network/test
Chapter 2
Accessing Oracle ILOM
Oracle ILOM
2-21