Table of Contents
Advertisement
Apply Thermal Grease.
7.
Using the supplied syringe, evenly apply all of thermal interface material (TIM) in
an "S" pattern centered on the top of the processor.
Keep the "S" pattern inside a half inch of the processor edge so the grease doesn't
overflow and contaminate other parts of the processor housing.
Note:
Do not distribute the TIM. The pressure of the heatsink will do so for you
when you install the heatsink.
Lower the heatsink (see the following note) on to the six socket heatsink
8.
attachment studs.
Screws 1 and 2 are slightly longer than screws 3, 4, 5, and 6. Carefully lower the
module.
Chapter 13
Install a Processor
13-16
Advertisement
Chapters
Table of Contents
