Oracle Exadata X10M Service Manual page 42

• Sideband network management connection – Refer to "Sideband Network
Management Connection" in Oracle ILOM Administrator's Guide for Configuration
and Maintenance.
• Host-to-ILOM interconnect – Refer to "Dedicated Interconnect SP Management"
in Oracle ILOM Administrator's Guide for Configuration and Maintenance.
Oracle ILOM Documentation
Prerequisites: You need to know the IP address or host name of the service
processor (SP) to log in to Oracle ILOM CLI or web interface remotely using one of the
network ports on the server.
Note:
To enable first time login and access to Oracle ILOM, a default Administrator
account and its password are provided with the system. To build a secure
environment, change the default password (changeme) for the default
Administrator account (root) after your initial login. If this default
Administrator account has since been changed, contact your system
administrator for an Oracle ILOM user account with Administrator privileges.
To prevent unauthorized access to Oracle ILOM, create user accounts for
each user. For procedures to change the root password and create user
accounts, refer to
If you do not know the IP address of the SP, reset the Oracle ILOM SP. See
Manually Resetting a Server's Service
the Oracle ILOM service processor (SP):
• You need to reset the Oracle ILOM SP to complete an upgrade or to
clear an error. Resetting the server SP automatically disconnects any
current Oracle ILOM sessions and renders the SP unmanageable until
the reset process is complete.
• As the system administrator, you forgot the root account password and
need to recover it.
Access Serial Remote Host Console
To access the host console remotely.
Configure serial host console properties in Oracle ILOM as required.
1.
Before you access the host console, you can configure properties in Oracle ILOM
to make the serial host console easier to view and to enable logging. Refer to the
Oracle ILOM Administrator's Guide for Configuration and Maintenance and
Configuring Serial Port
Establish a connection to the Oracle ILOM CLI. Log in to the Oracle ILOM CLI
2.
using an account with Administrator privileges.
Ensure that the server is cabled for a local serial connection to Oracle ILOM.
a.
See Back Panel Connector
Press Enter on the terminal device that is connected to the server.
b.
At the Oracle ILOM login prompt, type your user name, and press Enter.
c.
Oracle ILOM Documentation.
Processor. Two issues might occur on
Sharing.
Locations.
Chapter 2
Accessing Oracle ILOM
2-18