Oracle Exadata X10M Service Manual page 261

AMD CBS Option
PCIe ARI Support
System Management Unit (SMU)
Common Options
Thermal Design Power (TDP) Control
TDP
Package Power Tracking (PPT) Control
PPT
Determinism Control
Determinism Enable
xGMI Link Width Control
xGMI Force Link Width Control
xGMI Force Link Width
xGMI Max Link Width Control
xGMI Max Link Width
Algorithm Performance Boost Disable
(APBDIS)
DfPstate
NBIO RAS Common Options
PCI AER Reporting Mechanism
Enable AER Cap
Description
With Force APCB Update enabled, allows you to enable (default) or
disable Alternative Routing-ID Interpretation (ARI).
With Force APCB Update enabled, allows you to use the fused
Thermal Design Power TDP (Auto) or set customized TDP
(Manual). Default is Manual.
With Force APCB Update enabled, allows you to set TDP in decimal
format. The minimum value is 0 and the maximum value is
4294967295. Default is 400.
With Force APCB Update enabled, allows you to use the fused PPT
(Auto) or set customized PPT (Manual. Default is Manual.
With Force APCB Update enabled, allows you to set PPT in decimal
format. The minimum value is 0 and the maximum value is
4294967295. Default is 400.
With Force APCB Update enabled, allows you to use the default
performance determinism settings (Auto) or set custom
performance determinism settings (Manual). Default is Manual.
With Force APCB Update enabled, allows you to specify Power
(default) or Performance for determinism control.
With Force APCB Update enabled, allows you to use the default
xGMI link width controller settings (Auto) or set custom xGMI link
width controller settings (Manual). Default is Manual.
With Force APCB Update enabled, you can specify not forcing the
xGMI to a fixed width (Unforce) or force the xGMI link to a specified
width. Default is Force.
With Force APCB Update enabled, you can set the xGMI force link
width at 2 (x16), 1 (x8), or 0 (x4). Default is 2.
With Force APCB Update enabled, you can use the default xGMI
maximum supported link width (Auto) or set a custom xGMI
maximum link width (Manual). Default is Manual.
With Force APCB Update enabled, you can select 0 to set the
maximum xGMI link width to x8 or select 1 (default) to set the
maximum xGMI link width to x16.
With Force APCB Update enabled, you can select 0 to set mission
mode and not use APBDIS or select 1 (default) to use APBDIS.
With Force APCB Update enabled, when you use APBDIS, you can
set the Data Fabric P-State (DfPstate) index from 0-4. Default is 0.
With Force APCB Update enabled, allows you to select the method
of reporting AER errors from PCI Express. Firmware First allows
BIOS to handle errors first through the generation of a system
management interrupt (SMI). Otherwise OS First (default) allows the
OS to handle the errors first through the generation of a system
control interrupt (SCI).
With Force APCB Update enabled, enable or disable Advanced
Error Reporting capability. Default is Auto.
Appendix F
Advanced Menu
F-6