Oracle Exadata X10M Service Manual page 154

Chapter 13
Install a Processor
To clear the fault identified in previous step, type the following command: set
b.
command
-> set /SYS/MB/P0 clear_fault_action=true
For example:
set /SYS/MB/P0 clear_fault_action=true
->
y
Are you sure you want to clear /SYS/MB/P0 (y/n)?
Set 'clear_fault_action' to 'true'
Alternatively, to clear all known faults in the server, log in to the Oracle ILOM service
processor from the Oracle ILOM Fault Management Shell and issue the fmadm
repair command.
For more information about how to use the Oracle ILOM Fault Management Shell
and supported commands, see the Oracle ILOM User's Guide for System Monitoring
and Diagnostics at Oracle ILOM Documentation.
13-19