Trunk Connections; Nt8D14 Universal Trunk Card - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Page 364 of 562

Trunk connections

NT8D14 Universal Trunk card

Table 51
NT8D14 Universal Trunk — modes and option settings
Modes
Central (CO)
2-way TIE trunk (loop Dial Repeat)
2 -way TIE trunk (Outgoing Incoming Dial)
Recorded Announcement (RAN)
Paging trunk
Japan CO/DID operation
DID operation
Loop length>2000 ohms
DID operation
Loop length <2000 ohms
Note: OFF indicates no strap present.
J1 and J2 locations apply to all eight trunks.
553-3011-210 Standard 1.00
Connecting the trunks
The Universal Trunk card provides eight analog trunks which can function in
the modes shown in Table 51.
October 2003
Location
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
Jumper strap
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF