Mounting the cabinets
Contents
Introduction
This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Earthquake bracing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wall mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Items required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Floor mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Items required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This chapter explains two methods of installing cabinets. Procedure 6 on
page 117
describes how to mount the cabinet on a wall. Procedure 7 on
page 121
describes how to mount the cabinet on the floor using a pedestal.
Note: For a Succession 1000M Cabinet system, the Succession
Signaling Server must be mounted in an external 19-inch equipment
rack. Refer to Signaling Server: Installation and Configuration
(553-3001-212) for information on installing the Succession Signaling
Server hardware.
Small System
Installation and Configuration
Page 115 of 562
115
116
116
116
121
121