Page 40 of 562
Cabinet system equipment
Telephones and attendant consoles
Cables and wires
Table 4
Cable and wire specifications (Part 1 of 3)
Cables and Wires
NTAK98 power supply cord
NTDK27 Ethernet adapter cable
A0632902 Fiber-optic cable (multi-mode
plastic)
Glass Fiber-optic cable (3 km) used on Fiber
Expansion Daughterboards (Multimode or
Single Mode, depending on interface)
553-3011-210
Standard 1.00
•
NT7D16 Data Access Card (DAC)
•
NTAG26 Extended Multi-frequency Receiver (XMFR) card
Supported telephones are as follows:
•
Analog (500/2500-type) telephones with or without message waiting
lamps.
•
Meridian Digital Telephones (M2006, M2008, M2009, M2018, M2112,
M2216, M2616 and M3000).
•
M2616 or M2216 Central Answering Position (CAP). This telephone
must be equipped with an ACD LCD display in order to function as a
CAP telephone.
•
Meridian 2250 (TCM) attendant consoles.
Table 4 lists the cables and wires used with a Cabinet system.
October 2003
Purpose / Description
Connects a system cabinet to the ac
commercial power source.
Length: 9 ft 10 in. (3000 mm).
Provides a 15-pin AUI Ethernet interface.
Connects a main and expansion cabinet by
interfacing with an expansion daughterboard
and a Fiber Receiver card.
Length: 10 m (33 ft).
Must be supplied locally by a facilities provider.
Length up to 3 km (1.8 mi).