Introduction; Cabinets; Cable Connectors - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Page 22 of 562 Cabinet system equipment

Introduction

Cabinets

Cable connectors

553-3011-210 Standard 1.00
This chapter identifies major components of Cabinet systems. Identification
codes are given where appropriate.
For a description of the Succession Signaling Server for a Succession 1000M
Cabinet, refer to Signaling Server: Installation and Configuration
(553-3001-212).
The NTAK11 cabinet is used for both main and expansion cabinets.
Figure 1
NTAK11 cabinet
Connectors for cables to the cross-connect terminal and SDI ports are found
at the bottom of each cabinet.
The AUX, SDI, and Ethernet connectors are located at the bottom left-hand
side of the cabinet. The AUX port connects the cabinet to auxiliary equipment
October 2003