Connecting Telephones Without A Pftu - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Figure 127
Meridian Digital Telephone cross-connections

Connecting telephones without a PFTU

Procedure 54
Connecting telephones without a PFTU
1 Locate the telephone terminations on the cross-connect terminal.
2 Connect one end of the cross-connect wire to the leads of the telephone.
3 Locate the line card terminations on the cross-connect terminal.
For the Cabinet system, refer to Table 43 on
page 345.
For the Chassis system, refer to Table 45 on
4 Connect the other end of the cross-connect wire to the assigned TN
terminal block.
Refer to "Preprogrammed data" on
Connecting the telephones
page 399
Small System Installation and Configuration
Page 337 of 562
page 344 and Table 44 on
page 347.
for default DN assignments.