Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 223

Procedure 29
Installing the Universal Trunk card
1 Set the jumpers for the NT8D14 Universal Trunk circuit card according to
Table 24.
Table 24
NT8D14 Universal Trunk — modes and option settings
Modes
Central (CO)
2-way TIE trunk (loop Dial Repeat)
2-way TIE trunk (Outgoing Incoming Dial)
Recorded Announcement (RAN)
Paging trunk
Japan CO/DID operation
DID operation
Loop length>2000 ohms
DID operation
Loop length <2000 ohms
OFF indicates no strap present. J1 and J2 locations apply to all 8 trunks.
2 Insert the card in its assigned slot.
Installing optional circuit cards
End of Procedure
Small System
Page 223 of 562
Jumper
Location strap
J1, J2 OFF
J1, J2 OFF
J1, J2 OFF
J1, J2 OFF
J1, J2 OFF
J1, J2 OFF
J1, J2 ON
J1, J2 OFF
Installation and Configuration