Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 109

Figure 30
Faceplate on the Chassis system
10 If you require a UPS, install the UPS according to the manufacturer's
instructions.
11 If you have not already done so, remove the faceplate of the chassis.
a Loosen the quick-release screws on the faceplate of the chassis. See
Figure 30 on
b Lift the faceplate up.
c Remove the faceplate.
Installing the Chassis system
page 109.
Loosen the
quick-release
screws
Small System
Page 109 of 562
Installation and Configuration