Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 185

Installing and connecting reserve power supplies for the Cabinet system
Figure 69
NTAK28 breaker assembly location
10 Set the breakers on the NTAK28 Junction Box and on the NTDK70 or
11 Connect the NTAK0420 cable from the NTAK28 Junction Box to the
12 Connect the other end of the dc power cable to the connector on the
13 Connect the cable from the battery box to the NTAK28 Junction Box as
14 Set the breakers on the NTAK28 Junction Box and on the NTDK70 or
NTDK78 power supply to OFF.
power supply in the cabinet.
Secure the cable with the cable retainer in the cabinet.
NTAK28 Junction Box.
shown in Figure 70 on
NTDK78 ac/dc power supply to ON.
page 186.
End of Procedure
Small System
Page 185 of 562
Installation and Configuration