Security Device; Aux Id; Customer Database - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Security device

A security device comes with each new Small System. Attach this device to
the component side of the NTDK20 Small System Controller (SSC) card at
the time of initial installation. The security device remains there for the life
of the system.

AUX ID

Enter the AUX ID using the Software Installation Program. For new
Small System sites, the AUX ID is the system security ID. When assigned,
the AUX ID remains for the life of the system.

Customer database

The Software Installation Program allows the installation of a customer
database from one of the following sources:
Preconfigured database
The PC Card can include several preconfigured databases and their associated
feature sets. In addition, a minimal database is provided which contains basic
system configuration information with no customer data.
Archived database
The Software Installation Program allows the archiving of various databases
which can be used later at Small System sites. It allows multiple databases to
be configured off-site and then installed ready-to-use at customer sites.
Note: Off-site programming of databases is subject to all security
keycode restrictions. The off-site system must either use the security
device that will be installed in the Small System at the customer site, or
must have its own keycodes for the feature set used.
Remote restored database
A database can be restored remotely using the LD 143 Customer
Configuration Backup and Restore (CCBR) remote restore command.
Installing software
Small System Installation and Configuration
Page 303 of 562