Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 164

Page 164 of 562
553-3011-210 Standard 1.00
Installing the power supplies for the Cabinet system
Procedure 14
Installing the ac power supply
1 Set the ac breaker on the front of the power supply to the OFF position.
2 Make sure that the switches on the power supply are properly set. See
Figure 58 on page
3 Insert the power supply into the first slot on the left of the card shelf (refer
to Figure 57 on
4 Lock it into place with the card tabs.
5 Attach the power line cord to the connector on the left side of the power
supply (see Figure 59 on
card guides.
October 2003
162.
page 160).
page 165) by feeding the cord up through the