Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 95

Figure 23
Cable ends and fiber coupler for 100BaseF connectivity
A0346816 ST Fiber
Coupler
IP daughterboards. The two A0817052 fiber cables are usually
connected to the customer's LAN.
• Use the NTDK8305 2-meter STP CAT 5 extension cable to connect
the main and IP expansion cabinets using 100BaseT IP
daughterboards. A customer-supplied straight-through cable is used
in place of the NTTK34 2-meter cross-over cable.
Note: You will need to work with your local data network administrator for
IP provisioning.
Installing the Cabinet system
A0817052 MT-RJ end
A0817052 MT-RJ to ST
cable (B) Rx end
A0817052 MT-RJ to ST
cable (A) Tx end
Small System Installation and Configuration
Page 95 of 562