Passwords And Codes; Default Numbering Plan - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Passwords and codes

Default numbering plan

Table 72 shows each function in the left column and a corresponding
password or code on the right.
Table 72
Passwords and codes
Function
TTY password
(for access to TTY Small System overlays)
Meridian Mail administration password
Administration telephone password
Administration telephone FFC
SPRE code
Telephone relocation Flexible Feature Code
Telephone Removal Flexible Feature Code
Telephone relocation password (SCRD)
The default numbering plan for Small Systems is based on the following
guidelines:
• The default numbering plan uses four digits and starts at 2200.
• The prime extension number (DN) for each telephone is in the range
2200–2XXX. The value of "XXX" varies depending on the number of
telephones that you have in the system. Any secondary extension
numbers use numbers outside this range. This arrangement allows the
Small System and Meridian Mail to automatically configure telephones
and corresponding mailboxes without manual intervention.
• Meridian Mail uses extension 7000 for access, 7001 for Auto Attendant,
7002 for Express Messaging, and 7003 for Prompt Maintenance.
Preprogrammed data
Small System Installation and Configuration
Page 401 of 562
Code or extension(s)
0000
adminpwd
1234
*41
1
*40
*42
1234