Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 305

12 Reboot the main cabinet or chassis.
13 Wait for link to come up.
Note: IP expansion cabinet or chassis software must be the same
software version as the main cabinet or chassis.
CAUTION WITH ESDS DEVICES
Wear the antistatic wrist strap provided in the bottom of
the cabinet before handling circuit cards. Static electricity
can damage the components of power supplies and
circuit cards.
Procedure 49
Installing software
Note: This procedure assumes that the system installation procedures in
the chapters "Installing the Cabinet system" on
Chassis system" on
is up and running. The Link LED on the software daughterboards should
be lit and green.
1 Make sure the SSC card is in CPU slot (slot 0) of the main cabinet or
chassis.
For first-time installations, software is installed from the SSC card.
Software is loaded on the SSC card before it is sent to the customer site.
Installing software
page 107 have been performed and that the system
Small System
Page 305 of 562
page 91 or "Installing the
Installation and Configuration