Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 308

Page 308 of 562
553-3011-210 Standard 1.00
Installing software
5 Select Main Menu option 1 for a new installation.
If you are installing from a PC Card, select item 4.
Call Server/Main Cabinet Software Installation Main
Menu:
1. New Install or Upgrade from Option 11/11E - From
Software Daughterboard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery
Card
[q]uit, [p]revious, [m]ain menu, [h]elp or [?],
<CR> - redisplay
Enter selection: 1<CR>
6 Indicate whether the system has a Succession Signaling Server.
Does this System have a Signaling Server? (y/n):
*** NOTE: The following prompts require information
on the Keycode Data Sheet.
Please have it available. ***
Succession Enterprise Software Rls 0300 will be
installed.
7 Select the feature set to be enabled.
Note: The feature set selected must match the one provided with
keycodes. The feature set names shown below are examples only.
Select Feature Set You Wish to Enable:
1. General Business (NTSKxxxx)
2. Enhanced Business (NTSKxxxx)
3. Enterprise (NTSKxxxx)
4. NAS/VNS (NTSKxxxx)
[q]uit, [p]revious, [m]ain menu, [h]elp or [?],
<CR> redisplay
(example only:)
Enter Selection: 2 <CR> (Enhanced Business)
October 2003