Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 534

Page 534 of 562
LD 23 – Configuring ACD as the night number
Prompt Response
AST <CR>
DSAC <CR>
MAXP 1–120
SDNB (NO) YES
BSCW (NO) YES
ISAP (NO) YES
FRT 0–2044
SRRT 0–511
SRT 0-2044
NRRT 0-127
FROA (NO) YES
NCFW x...x
FORC (NO) YES
FRT 0–2044
SRRT 0–511
553-3011-210 Standard 1.00
Central Answering Position
Description
Associated set (used with Meridian Link only).
Server IS/data service access code (used with Meridian
Link only).
Maximum number of positions.
Block (or not) calls to the Secondary DN.
Block (or not) calls to the secondary DN on walkaway.
ACD messages sent (not sent) across the ISDN/AP link.
Time in seconds allowed before unanswered incoming ACD
calls are connected to the first RAN (appears if FRRT RAN
route number is identified above).
Second RAN route number for ACD.
Time in seconds before second RAN is connected to ACD
calls (appears if SRRT RAN route number is identified
above).
RAN route number assigned as night announcement for
ACD calls.
First RAN to be given to incoming calls immediately.
Night call forward DN for ACD calls (up to 23 digits).
Call forcing option.
Time in seconds allowed before unanswered incoming ACD
calls are connected to the first RAN (appears if FRRT RAN
route number is identified above).
Second RAN route number for ACD.
October 2003