Installing And Connecting Sdi Ports; Ntdk20 Ssc Card - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Page 270 of 562
Figure 112
Modem eliminator connections and designations
FGND 1
TX 2
RX 3
RTS 4
CTS 5
DSR 6
CD 8
DTR 20
Not Used 11
Not Used 12
SGND 7

Installing and connecting SDI ports

NTDK20 SSC card

553-3011-210 Standard 1.00
Installing and connecting SDI and Ethernet ports
This section describes how to access SDI ports through the following:
• NTDK20 SSC card
• NTDK23, NTDK25 and NTDK80 Fiber Receiver cards
• NTAK02 SDI/DCH card
• NTAK03 TDS/DTR card
You can use a switch setting on the circuit card's faceplate to control the baud
rate for port 0. Make sure the baud rate and device option settings are set
correctly.
October 2003
1 FGND
2 TX
3 RX
4 RTS
5 CTS
6 DSR
8 CD
20 DTR
11 Not Used
12 Not Used
7 SGND