Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 84

Page 84 of 562 Bracing against earthquakes
553-3011-210 Standard 1.00
3 Determine where to place the fasteners.
Refer to Figures 20 through 22 if you need help with where to place the
fasteners on the backboard. In each figure, the minimum (2 ft by 6 ft) and
maximum (4 ft by 8 ft) sizes of the backboard are used as examples.
• Figure 20 on
metal stud walls with the minimum allowed stud spacing of 16 in.
(400 mm).
• Figure 21 on
metal stud walls with the maximum allowed stud spacing of 24 in.
(600 mm).
• Figure 22 on
and masonry walls.
October 2003
page 85 provides the fastener locations for wood and
page 86 provides the fastener locations for wood and
page 87 provides the fastener locations for concrete