Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 143

Figure 50
Chassis stops on the wall shelf brackets
5 Place the chassis on the shelf brackets. Carefully slide the chassis on the
wall shelf brackets until it touches the chassis stops on the brackets. See
Figure 50.
Chassis
stops
6 Fasten the chassis in position using the four thumb screws, located on the
bottom side of the shelf brackets.
7 Tighten the eight #12 wood screws into the plywood backboard. Make
sure that the shelf brackets and chassis are fastened securely in position.
See Figure 51 on
Mounting the chassis
page 144.
Small System
Page 143 of 562
Installation and Configuration