Circuit Card Assignments For The Chassis System - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Installing Small System Controller and Fiber Receiver cards

Circuit card assignments for the Chassis system

Figure 71
Circuit card assignments in the chassis
Slots 04,05,06
NTDK16 48-port
DLC ONLY
Slot 03 - Any IPE or CE card
Slot 02 - Any IPE or CE card
Slot 01 - Any IPE or CE card
Slot 00 - NTDK20 SSC
Figure 71 on page 189
assignments for the chassis and chassis expander. Follow these diagrams to
make sure that you have all circuit cards inserted in the correct slots.
Note 1: See the card slot assignment table in the equipment layout
chapter of Small System: Planning and Engineering (553-3011-120) for
the cards that you can insert in the chassis.
Note 2: Slot 4 accepts the NTDK16 48-port DLC card only. However,
you can place a double-width card in slot 3 and it can overlap into slot 4.
and Figure 72 on page 190
Chassis
Small System
Page 189 of 562
show the circuit card
553-AAA0531
Installation and Configuration