Ip Line In Survivable Small Systems - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Peripheral Software Download
Peripheral Software Download (PSDL) is available from the main cabinet or
chassis in normal mode only. PSDL is not supported on IP expansion cabinets
or chassis when they are in survival mode.

IP Line in survivable Small Systems

This section describes certain aspects of IP Line card configuration that are
specific to survivable IP expansion. For more information about configuring
Voice Gateway Media Cards and the IP Line application in Small Systems,
refer to "IP Line card configuration" on
When distributing IP Line cards across different IP expansion cabinets or
chassis, the IP expansion cabinets or chassis can be configured to each have
their own node or to belong to the same node. If the IP expansion cabinets or
chassis are NOT in the same location as the main cabinet or chassis, then each
IP expansion cabinet or chassis must have its own node.
This is related to which survival IP address is configured on the IP Line cards:
• For a remote location, the survival IP address of the IP Line cards on that
node = the IP address of the SSC on that node.
• For the same building, all survivable IP addresses on IP Line cards are
configured to the IP address of only one IP expansion cabinet or chassis.
There are two survivable mode options:
1 IP expansion cabinets or chassis in separate nodes for IP Line cards
(mandatory if IP expansion cabinets or chassis are in a different location
from the main cabinet or chassis)
— Trunks and gateway channels are available in all IP expansion
cabinets or chassis.
— More administration is required as there is more than one node to
manage.
Survivability
page 321.
Small System Installation and Configuration
Page 517 of 562