Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 323

the following procedures. Certain special considerations apply for a
survivable Small System. Refer to "IP Line in survivable Small Systems" on
page 517.
1 Configure the Voice Gateway Media Card on the main and IP expansion
cabinets or chassis. Follow Procedure 51 on
on page 325.
2 Continue with the procedures in IP Line: Description, Installation and
Operation (553-3001-365) and Internet Terminals (553-3001-368) for
configuring IP Line for Meridian 1 systems, as follows:
a Configure bandwidth management zones (LD 117).
b Configure IP Line physical TNs (LD 14).
c Configure virtual superloops for Internet Telephones (LD 97).
d Configure Meridian 1 features (LD 11).
e Configure Internet Telephone dedicated soft keys.
3 Configure IP Line data with OTM or Element Manager. See
"Configuring IP Line data with OTM 2.1" on
IP Line data with Element Manager" on
4 Transmit IP Line node configuration data from OTM or Element
Manager to the Voice Gateway Media Cards.
5 Upgrade the Voice Gateway Media Card software and Internet
Telephone set firmware.
6 Assemble and install Internet Telephones. Refer to Internet Terminals
(553-3001-368) for instructions on the installation of the Internet
Telephone.
7 For a survivable system, verify IP Line operation in survival mode. Refer
to Procedure 75 on
IP Line card configuration
page 519.
Small System
Page 323 of 562
page 324 and Procedure 52
page 326 and "Configuring
page 329.
Installation and Configuration