Figure 16
25-pair cable connectors on the back of the chassis
Cable connectors
25-pair cables connect cards to the cross-connect terminal. Connectors for
these cables are on the back of the chassis and the chassis expander. See
Figure 16 on
page
47.
25-pair
connectors
The Auxiliary (AUX), Serial Data Interface (SDI), and Ethernet connectors
are on the back left-hand side of the chassis. See Figure 17 on
The AUX port connects auxiliary equipment, such as a Power Failure
Transfer Unit (PFTU), to the Chassis system. The SDI connector in the
chassis interfaces three SDI ports using a three-port SDI cable. The Ethernet
connector in the chassis provides a 10 Mbit Ethernet port. The Ethernet port
accepts an industry-standard Medium Access Unit (MAU). Insert the
Ethernet cable into this MAU.
Chassis system equipment
Small System
Installation and Configuration
Page 47 of 562
page
48.