Agilent Technologies E4991A Service Manual page 357

Messages
Cal done
Messages indicating the results (or current status) of processing
Cal done
Calculation and storage of a calibration coefficient completed.
Cal measure aborted
Measurement of calibration data aborted.
Comp done
Calculation and storage of a fixture compensation coefficient completed.
Comp measure aborted
Measurement of a fixture compensation coefficient aborted.
Peak not found
Peak search function executed, but no defined peak was found.
Target value not found
Target search function executed, but no target measurement value was found.
Trigger hold
Measurement is in hold mode, in which a trigger is not accepted.
Wait -- measuring cal standard
Calibration data are now being measured.
Wait -- measuring comp standard
Fixture compensation data are now being measured.
Appendix E 357