Firmware Update; Required Equipment; How To Make The E4991A Firmware Installation Disk - Agilent Technologies E4991A Service Manual

Firmware Update

Firmware Update
Firmware Update

Required Equipment

•
•

How to make the E4991A Firmware Installation Disk

The following is the procedure to make the E4991A Firmware Installation Disk.
Step 1. Copy the following files from Agilent Technologies web site to the three floppy disks using
your computer's FDD.
•
•
•
Step 2. Assign the Label name as follows using the properties of your computer's Windows
Explorer as shown in Figure C-1.
•
•
•
Figure C-1 Windows Explorer (example)
1. Insert the disk1(1 of 3) into the FDD of your computer.
2. On the Windows Explorer, click 3 1/2 Floppy [A:] and confirm the files.
3. Right click on 3 1/2 Floppy [A:], then click Properties. The Properties dialog box
4. Enter the Label name in the Label box of properties dialog box (General) for the disk1
334
E4991A (with keyboard and mouse)
Three blank floppy disks (DOS format)
disk1(1 of 3)-- e4991a.msi, e499101.cab
disk2(2 of 3)-- e499102.cab
disk3(3 of 3)-- e499103.cab
DISK_1 (for disk1)
DISK_2 (for disk2)
DISK_3 (for disk3)
appears.
as shown in Figure C-2, and press the button.
OK
Appendix C