Initial Registration Of E4991A (For Serial Prefix My433 And Later) - Agilent Technologies E4991A Service Manual

Initial Registration of E4991A (for serial prefix MY433 and
later)
When you start up the E4991A for the first time or after executing system recovery, you
need to perform the initial registration of the Windows 2000 operating system of the
E4991A.
NOTE You cannot use the front panel keys during the initial registration of the E4991A therefore
connect the mouse and the keyboard before turning on the power.
NOTE If you perform the following procedure incorrectly, a message asking you whether to return
to the previous registration screen and perform the registration appears. In this case, follow
the instruction to return to the previous registration screen.
Step 1. Turns on the E4991A.
Step 2. The Windows 2000 Professional Setup wizard appears. Click the
B-4).
Figure B-4 Windows 2000 Professional Setup wizard
Appendix B

Initial Registration of E4991A (for serial prefix MY433 and later)

System Installation for A27 Mass Storage
button (Figure
Next >
329