Agilent Technologies E4991A Service Manual page 182

Troubleshooting
Function Depend Troubleshooting
b. Click the
c. Click the
4-25).
Figure 4-25 TCP/IP Properties dialog box (
d. If the IP Address and the Subnet Mask are not assigned yet, enter them as follows.
IP Address
Subnet Mask
If they are already assigned, go to step 4.
The following is how to enter the IP Address and the Subnet Mask.
Click the
input your IP address in the
box (overwrite the initial values) to assign a specific IP address and subnet mask.
Step 4. Shut down the E4991A
a. Click the
b. Click the
Change dialog box (Figure 4-26).
Figure 4-26 System Setup Change dialog box
c. Click the
182
icon in the
TCP/IP Configuration
button. This opens the TCP/IP Properties dialog box (Figure
Properties
IP Address
192.168.0.1
255.255.255.0
option button in the
Specify an IP address
IP Address
button to close the TCP/IP Properties dialog box.
OK
button to close Network dialog box. This opens the System Setup
OK
button to restart the E4991A.
Yes
tab to select it.
tab)
IP Address
box and your subnet mask in the
tab to select it and
Subnet Mask
Chapter 4