A4 If Gain Adjustment; Required Equipment; Procedure - Agilent Technologies E4991A Service Manual

Adjustment

A4 IF Gain Adjustment

A4 IF Gain Adjustment
The purpose of this procedure is to adjust the IF Gain in the A4 Receiver Board.

Required Equipment

Calibration Kit

Procedure

Step 1. Run the adjustment program.
Step 2. Choose the A4 Adjustment in the Spot Adjustment.
It is possible to perform this item with the All Adjustment too.
Step 3. Connect the instrument as shown in Figure 3-14.
Figure 3-14 A4 IF Gain Adjustment Setup
Step 4. Follow the adjustment program instruction to update the correction constant.
140
Description
16195B(furnished with E4991A)
Recommended Model
Chapter 3