Agilent Technologies E4991A Service Manual page 331

Step 5. In the Network Identification Wizard dialog box (1/2), select the
assumes the following user has logged on to this computer
agt_instr
(Figure B-7).
Figure B-7 Network Identification Wizard dialog box (1/2)
Step 6. In the Network Identification Wizard dialog box (2/2), click the
initial registration of the E4991A (Figure B-8). Then, the measurement display of
theE4991A appears.
Figure B-8 Network Identification Wizard dialog box (2/2)
Appendix B
Initial Registration of E4991A (for serial prefix MY433 and later)
is in the box. If not, type in
User Name
System Installation for A27 Mass Storage
Windows always
box and check that
. Finally, click the
agt_instr
button to finish the
Finish
button
Next>
331