Agilent Technologies E4991A Service Manual page 123

Figure 3-3 Order of DC Bias Adjustment
The Spot Adjustment in the Adjustment Program can perform the following adjustments
automatically according to Order of Adjustment as shown in Table 3-1.
Table 3-1 Required Adjustment Items in the Spot Adjustment
Spot Adjustment ( in the
Adjustment Program)
*->
A1 Adjustment
A3 Adjustment
A4 Adjustment
A2 Adjustment (Opt.001)
A5 Adjustment (Opt.1D5)
Default Cal Adjustment
Chapter 3
*-> *-> *-> *->
*-> *-> *-> *->
*->
Order of Adjustment
Adjustment Items
*-> *-> *
*-> *-> *
*-> *-> *
*->
*
Adjustment
*-> *
*
123