To Check The Lan (For Serial Prefix My433 And Later) - Agilent Technologies E4991A Service Manual

Troubleshooting
Function Depend Troubleshooting
Figure 4-28 Example of the ping command fails

To Check the LAN (for serial prefix MY433 and later)

Procedure
Step 1. Exit from the E4991A Measurement Display as shown in "How to exit from the E4991A
Measurement View" on page 155. Then windows desktop screen is displayed.
Step 2. Connect a LAN cable between the LAN port on the rear panel and an external computer
(PC).
NOTE
Use a crossed LAN cable to enable the peer-to-peer communication between the E4991A
and the PC. If the E4991A needs to be connected to the PC via a multi port Hub, use a
straight LAN cable.
Step 3. Double-click "
"
Control Panel
Step 4. Double-click
Connections window as shown in the left of Figure 4-29.
184
" icon on Windows desktop of the E4991A. And double-click
My Computer
". The Control Panel window will appear.
"Network and Dial-up Connections"
icon to show the Network and Dial-up
Chapter 4