Front Panel Removal; Tools Required; Procedure - Agilent Technologies E4991A Service Manual

Rf impedance/material analyzer

Hide thumbs Also See for E4991A:

Table of Contents

Front Panel Removal

Pozidriv screwdriver, pt size #2 (medium)

Flat edge screwdriver

Step 1. Remove the top trim with a flat edge driver.

Step 2. Remove the nine screws (item 1 and 2 in Figure 7-1 ) from the top and bottom side of the

front frame.

Screws fastening Front Panel

Step 3. Gradually pull the front panel assembly towards the front by holding knob.

Replacement Procedure

Front Panel Removal