Replacement Procedure
A50 Power Supply Assembly Removal (for serial prefix JP1KH, JP2KH, and
MY432)
A50 Power Supply Assembly Removal (for serial prefix
JP1KH, JP2KH, and MY432)
Tools Required
•
Procedure
Step 1. Remove the outer cover as described in "Outer Cover Removal."
Step 2. Disconnect the cables (item 9 and 10 in Figure 6-2 on page 236) connected to the power
supply
Step 3. Remove the three flat head screws (item 1 in Figure 7-2 ) from top side.
Step 4. Remove the three screws (item 2 in Figure 7-2 ) from the rear panel.
Figure 7-2
Power Supply Assembly removal
Step 5. Slide the power supply assembly toward front side, and lift it.
288
Pozidriv screwdriver, pt size #1 (small)
Chapter 7